Cheetah Mounts APTMMB Wall Mount Bracket with Universal Tilt for 32-65″ Flat …

December 1, 2013 - Comment

The APTMM tilt mount features a universal design that allows you to mount virtually any LED/LCD/Plasma display. The APTMM supports hole patterns up to 27.7″ horizontally by 19″ vertically as well as VESA hole patterns up to 600x400mm. The APTMM is designed with a slim 1.9″ profile as well as 15 degrees of downward tilt

Buy Now! £14.96Amazon.co.uk Price
(as of 2:43 pm UTC - Details)

The APTMM tilt mount features a universal design that allows you to mount virtually any LED/LCD/Plasma display. The APTMM supports hole patterns up to 27.7″ horizontally by 19″ vertically as well as VESA hole patterns up to 600x400mm. The APTMM is designed with a slim 1.9″ profile as well as 15 degrees of downward tilt depending upon the size of your TV. The APTMM is constructed with 8LBS of 100% High Grade Steel providing a sturdy and reliable mount. The APTMM solid wall plate allows for quick and easy installation and will support installation to studs up to 28″ apart (most homes are constructed with either 16″ or 24″ wood studs). The APTMM mount will fit the majority of LED, LCD and Plasma Displays up to 65″

Product Features

  • Universal Design Fits Most 32-65 inch TVs
  • Flush 1.5″ Profile (3.8 cm)
  • Tilt Range: 15° Downward
  • Supports up to 165LBS
  • 6″ 3-Axis Magnetic Bubble Level Included

Comments

chinesoul says:

Quality OK, but design’s not very good if you need tilt. The slim profile idea is good, and quite well fulfilled. But this make the work difficult if you need to tilt a large TV to the maximum. The bottom edge of the wall mount is very shallow. With large tilt, you will not be able to fix the screw from the bottom. Even with no tilt, there is not much space to insert the screwdriver. I have my 50″ plasma tilted on the mount, there is little space left from the bottom. The only option to tighten the screws is to loose the lock mechanism to the tilt, and then use a very long screwdriver to do the tricky job from underneath. IMO, if the manufacturer makes the bottom edge of the wall mount 10 mm deeper, it will be much easier to finish the job.However, If your TV is small, or the mounting position on the TV is low, or maybe there is extra space at the lower back of your TV, you may not need to experience this drawback.When everything is done and tightened, it looks good.

Anonymous says:

Arrived quickly, very easy to fit and is completely hidden by the TV. The connecting arms are extremely long so will fit a large TV very well. The TV I put up was in the bedroom and only 32″ so just covered the arms…… if your looking to put up a smaller TV please read the description as the arms will be visible.

Anonymous says:

This mount was very easy to install with the instructions provided. It is holding my 6 year old 42″ Sony perfectly, it’s only screwed into the wall studs but can easily take my weight.

Comments are disabled for this post.